• <table id="koomo"><noscript id="koomo"></noscript></table>
  • <noscript id="koomo"><source id="koomo"></source></noscript>
  • <noscript id="koomo"></noscript>
  • Find helpful information about your LG Product through our Help Library. Find helpful information about your LG Product through our Help Library.

    Help Library

    Find helpful information about your LG product

    LG TV - I see duplicated images or afterimages on the screen (ghosts)

    Troubleshooting



    You may experience symptoms such as image duplication and afterimages in a specific channel, sometimes caused by weak broadcast signals and not indicative of a product defect.

    Symptom screen where a specific screen comes out twice

    Causes and Symptoms

    • Weak broadcast signals are the problem.

    Try this

    Are you seeing duplicate images on every channel?

    ? Go to [Settings] and start [Picture Test] to check if the picture works normally.

    Running [Picture Test] in the Settings menu

    WebOS 5.0

    [2020 WebOS 5.0] Press the setting button on the TV remote and select [All Settings] → [Support] → [Additional Settings] → [Picture Test].
    Turn on the TV and press the [Settings] button on your TV remote.
    Select [All Settings] in the [Settings] menu.
    After pressing the remote control settings, select the All Settings menu
    ① Select [Support] and then ② [Additional Settings].
    Additional settings screen in Support
    ③ Select [Picture Test] in [Additional Settings].
    Picture test selection screen
    Perform [Picture Test] to check the screen condition.
    Picture test check screen

    [Prior to 2019] WebOS

    [2019 WebOS or before] Press the setting button on the TV remote and select [All Settings] → [Picture] → [Picture Test].
    Turn on the TV and press the [Settings] button on your TV remote.
    Select [All Settings] in the [Settings] menu.
    After pressing the remote control settings, select the All Settings menu
    ① Select [Picture] and then ② [Picture Test].
    Picture test screen in video settings
    Perform [Picture Test] to check the screen condition.
    Picture test selection screen
    If the problem persists in the picture test, please contact LG Electronics Service Center.
    If the test picture is displayed normally, it is likely that the broadcast signal has a problem.
    If the problem does not occur in the picture test, please contact the set-top service provider. (e.g., cable TV, Skylife, IPTV)

    WebOS How to check signal strength

    Press the setting button on the TV remote and select [All Settings] → [Channels] → [Channel Search] → [Manual Channel] → [Cable DTV].

    Turn on the TV and press the [Settings] button on your TV remote.
    Select [All Settings] in the [Settings] menu.

    After pressing the remote control settings, select the All Settings menu

    Select [Channels],
    ① [Channel Tuning], ② [Manual Tuning], and ③ [Cable DTV] in the specified order. (Select when using a cable TV)

    Select [Channels], ① [Channel tuning], ② [Manual Channel], and ③ [Cable DTV] in the specified order.

    You can see the signal strength and quality of the channel you are watching.

    Signal strength quality screen according to channel

    If the signal strength changes by more than 50% or the signal quality changes by more than 30%, it indicates a weak broadcast signal.
    In such a case, please contact your property management office or broadcast service provider.
    If the problem persists in the picture test, please contact LG Electronics Service Center.

    This guide was created for all models, so the images or content may be different from your product.

    a级毛片在线观看
    *Required question