• <table id="koomo"><noscript id="koomo"></noscript></table>
  • <noscript id="koomo"><source id="koomo"></source></noscript>
  • <noscript id="koomo"></noscript>
  • Bring New Life to Transparent Space

    *Images are for illustrative purposes only, actual product may differ in appearance

    Superb Transparency

    The LG Transparent LED film is an array of pixels connected to one another by a thin metal mesh line. The transparency of the LED film allows glass to remain mainly visible even after the film is attached. When the LED is switched is OFF, the film blends to a large degree with the glass.

    Superb Transparency

    *Images dramatised for illustrative purposes only.

    Fitting in with Flats and Curves

    The LG Transparent LED film supports curvatures up to 1,100R for concave or convex curved glass or window applications. This allows a wide range of venues to be redesigned with the LAT series as a landmark.

    Fitting in with Flats and Curves

    Self-adhesive Film

    Self-adhesive Film

    The LG Transparent LED film is self-adhesive, so it can be easily attached to the surfaces of existing window glass without the need for any complicated construction.
    Outstanding Expandability and Flexibility

    Outstanding Expandability and Flexibility

    The size and layout of the film can be customised to fit in to the installation area. It can be expanded by adding more films in a vertical or horizontal way, or cut in parallel with the bezel to meet size requirements.
    OCR (Optically Clear Resin) Direct Bonding

    OCR(Optically Clear Resin)Direct Bonding

    The LG Transparent LED film utilises the OCR bonding method, which protects LED pixels by fully filling the gap between the transparent layers to improve the product durability and flatness compared with the OCA (Optically Clear Adhesive) method, which leaves the LED either exposed or with an uneven surface and can cause LED damage or affect the image quality.

    * This is based on the internal comparison test between OCR and OCA with perforations of the upper transparent layer under the condition of -10?~ 45? temperature and 0 ~ 30% humidity.

    ^Images dramatised for illustrative purposes only.

    Enhanced Brightness and Control
    Impressive

    Brightness and Control

    With a pixel pitch of 14mm and brightness up to 2,100 cd/m2*, the LED Transparent Film attracts the attention of passers-by while displaying a wide range of colours. With the Control Manager solution, brightness can be adjusted and set based on time of the day – to display with optimal brightness.

    * The examined brightness may differ from testing environments including a photometer.

    ^Images dramatised for illustrative purposes only.

    webOS Smart Platform with Open API

    webOS Smart Platform with Open API

    LG webOS is a web-centric platform, making it easier for SIs and developers to build web-based solutions according to various environments. By supporting open API and compatibility with HTML, CSS, and JavaScript, you can save time and labour costs.
    Control Manager

    Control Manager

    The Control Manager platform allows you to remotely set, monitor and control the status of multiple displays in real-time*.
    For large installations areas with many displays, Control Manager helps to manage content in a more efficient way.

    *Internet connection and Control Manager software required

    Real-time 365 Care Service

    Maintenance is easier and faster with the optional Signage365Care service*, a cloud service solution provided by LG service. It remotely manages the status of displays in client workplaces for fault diagnosis and remote-control services, helping support the stable operation of clients' businesses.

    Real-time 365 Care Service

    *Additional charges may apply

    All Spec

    LED FILM

    • Model Name

      LAT140

    • Pitch

      13.7 ± 0.2 mm

    • LED Type

      R, G, B 3in1 Colour Package (SMD2020)

    • Resolution

      48x36

    • Pixels per Panel

      1,728

    • Pixel Density [point/m2 ]

      5,102

    • Brightness

      2,100 cd/m2 (Typ.)

    • Contrast Ratio

      100,000:1

    • Luminance Uniformity

      ≥ 70%

    • Viewing Angle (H x V)

      120 x 120

    • Lifetime (Half Brightness)

      Up to 50,000 Hrs

    • Daily Usage

      24 Hrs / 7 Days

    • Transmittance

      53%

    • Operating Temperature

      0° ~ 45° (Indoor Glass Installation Only)

    • Curved Installation

      1,100R (Convex & Concave, Glass Only)

    • Film Trimming

      Yes (Parallel to the Bezel Side Only)

    • Colour Processing

      9bit

    • Colours

      125,000,000 Colours

    • Colour Chromaticity

      Cx: 0.25±0.03, Cy : 0.34±0.03

    • Dimension (W x H x D)

      655 x 492 x 2.9mm(with Front & Back Protection Film)

    • Weight

      1 kg

    • Power Consumption

      37W(Transparent panel 1EA + Common Bezel kit 2EA)

    1ST BEZEL KIT

    • Model Name

      ACC-14LATB1

    • Dimension (W x H x D)

      69.4 x 492 x 25mm

    • Weight

      0.4 kg

    COMMON BEZEL KIT

    • Model Name

      ACC-14LATB2

    • Dimension (W x H x D)

      51.4 x 492 x 25mm

    • Weight

      0.3 kg

    POWER(BEZEL KIT & LED FILM)

    • Model Name

      ACC-LATP1

    • Dimension (W x H x D)

      183 × 86 × 28 mm

    • Weight

      0.769 kg

    • Input

      100~240V, 50~60Hz

    • Output

      19.5V/10.8A (210W)

    • Colour

      White

    • DC Output Cable

      14AWG, 1.5m

    • Type

      L Type

    UNIT CONTROLLER

    • Model Name

      LCLG140U

    • Resolution

      960x540 (1/4 FHD)

    • Interface

      LVDS In, RJ45 (4ea) Out

    • Maximum Transmission Length

      100 m (CAT5E, CAT6)

    • Dimension (W x H x D)

      293 x 37 x 188.7 mm

    • Weight

      1.5 kg

    • Power Consumption

      20 W

    • Accessories

      Power Cord, LVDS MCX Cable, ESG,
      Regulation Book, Warranty Card

    SYSTEM CONTROLLER

    • Model Name

      LCLG002

    • Video

      DP : 1920x1080@60Hz
      HDMI : 1920x1080@60Hz
      DVI-D : 1920x1080@60Hz

    • Input

      HDMI, DP, DVI-D, RS232C (Phone Jack Type), RJ45 (w/o LED Indicator), IR Receiver (for Installation), USB 3.0

    • Output

      DP, RS232C (Phone Jack Type), RJ45 (w/o LED Indicator), LVDS

    • Dimension (W x H x D)

      293 x193.3 x 40.1mm

    • Weight (Head)

      1.6 kg

    • Temperature Sensor

      O

    • Light Sensor

      O

    • Source Selection

      HDMI, DVI-D, DP

    • TPC (Temporal Peak Luminance Control)

      Yes

    • Power Consumption

      17 W

    • CMS S/W

      SuperSign CMS,Signage365care

    • Accessories

      Power Cord, IR & Bright Sensor, 4P Phone-to-RS232C Gender, ESG, Regulation Book, Warranty Card

    To access more technical documentation and resources, please visit the LG B2B partner portal.

    Pay with Zip

    Shop now. Pay later. Always interest-free.

    • cart

      Add your favourites to cart

    • checkout

      Select Afterpay at checkout

    • Log into or create your Afterpay account, with instant approval decision

    • installment

      Your purchase will be split into 4 payments, payable every 2 weeks

    All you need to appply is to have a debit or credit card, to be over 18 years of age, and to be a resident of Australia.

    Late fees and additional eligibility criteria apply. The first payment may be due at the time of purchase. For complete terms visit afterpay.com/en-AU/terms.

    LG Electronics Australia is offering Afterpay to online customers for orders up to the value of $3,000.

    Click below to find out more : How it Work and FAQs

    zip
    An account for everyone

    Choose the buy now, pay later account that suits you best.

    picture
    Repay your way
    Choose how you pay - weekly, fortnightly or monthly.
    picture
    Shop just about everywhere
    Shop at all your favourite places, online and instore, with the Zip app.
    picture
    Rewards
    Exclusive cashback offers when you shop, simply check the Zip app*.
    Most popular
    icon-payment-au-zip-pay

    Up to $1,000

    Interest free always

    For everyday spending, from fashion to fitness, eyewear to electronics, pet care to bills.

    Apply Now
    • Interest free always1

    • Flexible repayments

    • No establishment fee

    • $9.95 monthly account fee

      Pay your statement closing balance, in full, by the due date and we'll waive the fee.

    • Tap to pay everywhere Visa is accepted**

    icon-payment-au-zip-money

    Over $1,000

    Bigger purchases

    For buying that road bike, new sofa or renovating your home.

    Apply Now
    • Interest free for first 3 months1

      Retailers may offer longer interest free terms (6-60 months). At conclusion of the interest free period, interest will be charged at the standard annual rate 25.9%.

    • Flexible repayments

      Enjoy the freedom to set your schedule to weekly, fortnightly or monthly.

    • One-off establishment fee

      A one-off establishment fee may apply for new customers.

    • $9.95 monthly account fee

      Waived if you have nothing owing.

    • Interest free instalment plans2

      For purchases over $300 we'll automatically set you up to repay in equal instalments to help you avoid interest charges.

    1. Zip Pay

    Minimum monthly repayments are required. A monthly account fee of $9.95 applies and is subject to change. Pay your closing balance in full by the due date each month and we'll waive the fee. Available to approved applicants only and subject to completion of satisfactoryc redit check. Other charges may be payable. T&Cs apply.

    2. Zip Money

    Available to approved applicants only and subject to completion of satisfactory credit check. Minimum monthly repayments are required. Paying only the minimum monthly repayment amount will generally not repay a purchase within the interest free period. A monthly account fee of $9.95 will also apply and a one-off establishment fee may apply for new customers. Any balance outstanding at the expiry of the interest free period will be charged at the standard variable interest rate, 25.9% per annum as at 1 June 2023. Other charges may be payable, see T&Cs. Interest, fees and charges subject to change. Terms & Conditions apply and are available on application. See your contract for further details. Credit provided by ZipMoney Payments Pty Ltd (ABN 58 164 440 993), Australian Credit License Number 441878).

    Rewards are redeemable when you reach the Rewards Goal. See Promotion and Reward Program T&Cs for more details
    Tap to pay in store available with Zip Pay only. Use the Card everywhere that Visa contactless payments are accepted in store. Card T&Cs apply. Single-use card available with Zip Pay and Zip Money only. Use the Card everywhere that Visa contactless payments are accepted online. Card T&Cs apply
    ?
    a级毛片在线观看