• <table id="koomo"><noscript id="koomo"></noscript></table>
  • <noscript id="koomo"><source id="koomo"></source></noscript>
  • <noscript id="koomo"></noscript>
  • Find helpful videos about your LG product Find helpful videos about your LG product

    Video Tutorials

    Find helpful videos about your LG product

    LG Dishwasher - Spray Arm Maintenance

    Operation
    Show Script

    LG Dishwasher - Spray Arm Maintenance

    [Narrator]

    • Welcome to the LG customer support channel.

    • In this video we will show you how to properly clean and care for the spray arms in your newly enhanced fully integrated LG dishwasher.

    • For optimal results, it is important to periodically check and care for the spray arms to make sure that the water jet holes are not blocked by food particles.

    • When cleaning is necessary, remove the appropriate spray arm to clean.

    • There are 3 spray arms located inside of your LG dishwasher.

      • The lower spray arm is located under the lower rack

      • The upper spray arm is located under the upper rack

      • The top spray arm is located above the cutlery back


    • To remove the lower spray arm, move the lower rack forward.

    • Place your hands on the spray arm and pull up.

    • The spray arm will detach.


    • To remove the upper spray arm, pull the upper rack forward.

    • Turn the nut located above the spray arm under the rack counterclockwise and pull down.

    • The spray arm will detach.


    • To remove the top spray arm, start by removing the cutlery rack.

    • Use a screwdriver to release the retainer clip from the bracket.

    • There is a clip on each side of the bracket.

    • You can proceed to pull the spray arm out.

    • Make sure to not lose the pin that is attached to the spray arm.


    • If there is food lodged in the nozzles of the spray arm, take a toothpick or a small pointy object and dislodge it by breaking it up into pieces.

    • Tap the spray arm gently on a flat surface to get all of the pieces out.

    • By pouring water through the spray arm you can double check to make sure that all particles have been dislodged from the nozzles.


    • To reinstall the lower spray arm, place the spray arm directly over the insert and push down until it clips into place.

    • Make sure that the spray arm is able to turn freely.

    • To reinstall the upper spray arm, press it into place and turn the nut clockwise until it locks into place.

    • To reinstall the top spray arm, take the spray arm and the pin and push it back into place.

    • Make sure that the retainer clip engages,To see more videos about this product visit us at our YouTube page or at our website LG.com.


    a级毛片在线观看
    *Required question