The Styler modifies the drying time according to the detected temperature difference, not by assessing the moisture level in the clothes.
It utilizes a temperature sensor to detect the temperature difference between the air that passed through the heat exchanger earlier and the air that passed through it later.
If the temperature difference is large, the Styler concludes that there is lot of moisture left in the clothes, and thus increases the drying time.
Try this
If the drying time increased by more than 30 minutes, then press [Pause] and check the dryness of the clothes.
If the Styler determines that drying is incomplete 6 minutes prior to the end of cycle operation, it will extend the drying time to 16 minutes.
If the time continues to increase even after the additional drying time, press the [Pause] button on the control panel to halt the operation.
Feel the clothes to check if they are dry. If you are satisfied with the result, power off the Styler.
This guide was created for all models, so the images or content may be different from your product.
