Check the installation location
Check if the installation space is sufficient for the size of the product to be purchased or installed.
When installing the refrigerator, make sure to maintain clearance between the unit and the side walls, as well
as the rear wall.
Maintain a minimum gap of 2 cm between the top of the refrigerator door and the kitchen
cabinet.
Install the unit in a place where the ambient temperature is higher than 5℃ and lower than 43℃, and
avoid installation near heat sources.
Ensure that the floor is firm and level. Additionally, choose a
location with low humidity and good ventilation.
Check the space requirements for door opening.
The side space required to open the refrigerator door to the maximum angle varies depending on the type of
refrigerator.
Please ensure to check the width requirements for your specific model.
This will ensure
that you
have enough space to install the refrigerator and can open and close the door without any inconvenience.
General refrigerator
(Example is based on 500L unit)
Side-by-side refrigerator
(Example is based on 600L unit)
Kimchi refrigerator
(Example is based on 400L unit)
Check the delivery path
Check the delivery path to the installation location to ensure safe delivery of the product.
The actual product dimensions and packaging size may vary depending on the product model.
※ To safely move the product, ensure a space of 5 to 10cm (1.9 to 3.9 inches) between the packaged product and the delivery path (hallway, stairs, etc.).
This guide was created for all models, so the images or content may be different from your product.
