• <table id="koomo"><noscript id="koomo"></noscript></table>
  • <noscript id="koomo"><source id="koomo"></source></noscript>
  • <noscript id="koomo"></noscript>
  • Find helpful information about your LG Product through our Help Library. Find helpful information about your LG Product through our Help Library.

    Help library

    Find helpful information about your LG product

    LG dryer - Water splashes inside the drum

    Troubleshooting

    Inside the drum, no water but air may enter.

    ? When drying is completed, a big sound will be made while the machine automatically washes the condenser.

    The product is designed to prevent the water remaining at the bottom from splashing into the drum while drying.
    In the condenser dryer, dry air comes into the drum and goes through the filter holding the moisture of the clothes to the heat exchanger to dry the wet clothes.
    As it passes through the heat exchanger, condensate water is created, which will be used for washing the condenser and then will be drained.

    That is, in most cases no water will not enter the drum except air. Don't worry.

    Image describing the flow of warm air inside the dryer

    Try this

    Use only the amount of water recommended for running the Condenser Cleaning and the Condenser Care cycles.

    When using Condenser Care, add 1 liter of water, which is the recommended amount.
    If you add more than 1 liter, water may enter the tub.
    When you use dry cycles, the washing machine automatically drains the water generated during a wash cycle.
    Therefore, water cannot enter the tub during dry cycles.
    However, if you add wet clothes, water may accumulate inside the tub. So be sure to spin-dry your items before loading them.

    Add 1 liter of water

    This guide was created for all models, so the images or content may be different from your product.

    a级毛片在线观看
    *Required question