[LG Air Conditioner ThinQ] Wi-Fi lamp not blinking.

If you turn on Wi-Fi to set up a connection of LG ThinQ, the product will generate [Ding~?] sounds and the Wi-Fi lamp will blink.
Wi-Fi lamp will blink for about 10 minutes.

Try this

1. Some of wall mounted air conditioners do not support a connection with ThinQ.
Before registration, check if the product supports the Wi-Fi function.

2. Complete the product registration within time.
When the lamp is turned off after 10 minutes, press the button again to turn on the Wi-Fi mode.

Wi-Fi lamp is not blinking. [Wi-Fi lamp x, Smartphone search x]

Reset the power supply.
Unplug the power cord and try again after approximately one minute.
Press the product button to turn on Wi-Fi again.
※ Wi-Fi button differs on each product.

Wi-Fi lamp is checked but on the smart phone, there is no message, Wi-Fi[Whisen], [AIR~]. [Wi-Fi lamp o, Smartphone search x]

Reset the power supply.
Unplug the power cord and try again after approximately one minute.
Press the product button to turn on Wi-Fi again.
※ Wi-Fi button differs on each product.

Wi-Fi lamp is not blinking, but on the smart phone, I can search for Wi-Fi[Whisen], [Air~]. [Wi-Fi lamp x, smart phone search o]

If you cannot see the Wi-Fi lamp but on your smart phone, you can search for LGEwhisen~/LGE_AC~/LGE_AIR~ then it means that you can continue with registration.

The Wi-Fi lamp is not displayed but I hear the [Ding~?] sound.

When switching to Wi-Fi mode, you need to press the two buttons, But, if only one button is detected, the sound heard, but it fails to switch to Wi-Fi mode.
Try again.
If you cannot see the Wi-Fi lamp, but on your smart phone, you can search for LGEwhisen~/LGE_AC~/LGE_AIR~ then it means that you can continue with registration.

This guide was created for all models, so the images or content may be different from your product.